This anchor system consists of a screw anchor, galvanized anchor rod and galvanized eyenut. They are installed using a digger truck with the Chance anchoring tool system.

Square-Shaft "SS" multi-helix screw anchors are designed for heavy-guy loading. Extension shafts must be coupled to the helix section for installation to the proper depth. SS screw anchors consist of three galvanized components: the lead section, the extension shaft and the guy adapter.

Chance "Bust" Expanding Anchors expand to take full advantage of the available area. All eight blades wedge into undisturbed earth . . . there is no wasted space between blades.

The Cross-Plate anchor is made for installation in holes drilled by power diggers. Because the size of the hole does not affect holding capacity, the hole can be dug by the same auger that is used to dig the pole holes on transmission projects.

Available for one, two, or three guys for use with expanding and cross-plate anchors. Thimbleye®, Twineye® and Tripleye® rods distribute pulling stresses uniformly over individual strands of guy wire and keep the guy wire from spreading, kinking, or bending. Nuts included.

Traditional wedge style rock anchors and grouted rock anchors are available. The wedge anchor expands and wedges against solid walls of rock. Once it is expanded, the harder the pull on the rod-the tighter it wedges. Grouted anchors can be used in solid or broken rock. Rod should be in line with the guy.

Chance No-Wrench Screw Anchors may be installed by hand or machine. The Thimbleye® eye or Tripleye® eye on the rod has a large opening to admit a turning bar for screwing the anchor down.

The Chance corrosion-resistant disc anchor is designed for low resistivity, alkaline and acidic soils with electrolyte combinations. This anchoring system includes disk anchor, galvanized rod protected with plastic tube and fiberglass washer.

The Round-Rod "RR" multi-helix anchors are used in areas where weak soil conditions exist and moderate holding capacities are required. Extension shafts are required for installation to proper depth. RR screw anchors consist of three galvanized components: Lead section, extension shaft, and the guy adapter.

Quicker installing and more efficient than wood key. Made of structural steel, the Chance Pole Key anchor is used where guys are impractical or as backup to guys.

Protect transformers, switchgear and guys. Any equipment needing bumper protection is an ideal candidate. Cheaper than concrete. Hot-dip galvanized corrosion-resistant finish.