For sales and support visit:
hubbellpowersystems.com/contact/

Corrosion-Resistant Anchors

Chance design offers many advantages

The Chance corrosion-resistant disc anchor is designed for low resistivity, alkaline and acidic soils with electrolyte combinations. The anchor eye is forged directly to the rod, so the eye is an integral part of the anchor. The anchor's flanged cap nut is cast iron. It's large and heavy for greater protection. The heat-shrink sleeve over the galvanized anchor rod helps prevent moisture from going down the rod. The insulating washer is fiberglass-reinforced thermoset material for better load-bearing properties compared to thermoform materials.

Corrosion Resistant Anchor
Catalog No. Description
In. (mm)
Hole
Size

In. (mm)
Fits
Protected
Rod Size

In. (mm)
Holding Capacity‡ - (lbs.(kN))
(No Safety Factors Included) vs Soil Class
Class 3
500-600
in-lb
Class 4
400-500
in-lb
Class 5
300-400
in-lb
Class 6
200-300
in-lb
Class 7
100-200
in-lb
C1022008 16 (406) Anchor .187 (4.7) Thick 16 (406) 3/4 (19.1) 31000 (137.9)‡ 26500 (117.9)‡ 21000 (93.4) 16500 (73.4) 12000 (53.4)
C1022009 16 (406) Anchor .187 (4.7) Thick 16 (406) 1 (25.4) 31000 (137.9)‡ 26500 (117.9) 21000 (93.4) 16500 (73.4) 12000 (53.4)
C1022011 20 (508) Anchor .187 (4.7) Thick 20 (508) 1 (25.4) 40000 (177.9)‡ 34000 (151.2) 26000 (115.7) 21500 (95.6) 16000 (71.2)
C1022012 20 (508) Anchor .250 (6.3) Thick 20 (508) 1 (25.4) 40000 (177.9)‡ 34000 (151.2) 26000 (115.7) 21500 (95.6) 16000 (71.2)
C1022054 24 (610) Anchor .187 (4.7) Thick 24 (609) 1 (25.4) 50000 (222.4)‡ 41000 (182.4)‡ 33500 (149.0) 26000 (115.7) 20000 (89.0)
C1022050 24 (610) Anchor .250 (6.3) Thick 24 (609) 1 (25.4) 50000 (222.4)‡ 41000 (182.4)‡ 33500 (149.0) 26000 (115.7) 20000 (89.0)
C1022381 30 (762) Anchor .375 (9.5) Thick 30 (762) 1.25 (31.7) 78100 (347.4)‡ 64000 (284.7)‡ 52300 (232.6) 40600 (180.6) 31200 (138.8)

Note: Capacity ratings apply to properly installed anchors only. Failure to install within 5° of alignment with the guy load will significantly lower strength.


Fiber-Reinforced Washer

Fiber-Reinforced Washer
Catalog No. Fits Rod Size Approx. Wt./100 pcs.
C2100033 3/4" 23 lb.
C2100034 1" 19 lb.
C2100050 1.25" 30 lb.

Cap Nut

Cap Nut
Catalog Number Fits Rod Size Approx. Wt./100 pcs.
C2050407 3/4 " 242 lb.
C2050408 1 " 242 lb.
C2050590 1 1/4 " 300 lb.

Protected Rod for Corrosion-Resistant Anchor

These rods include fiber-reinforced washer and heavy-forged cap nut. Nut is attached to rod. Washer is shipped separately in a box. Galvanized Rod meets NEMA specification PH2 plus has asphalt coating, polyethylene tube and heat shrink collar.


Rod
Size
Rod
Tensile
Strength
lb.
Thimbleye®
Adapter
Twineye®
Adapter
Tripleye®
Adapter
Catalog
No.
Lb. /
100 Pcs.
Catalog
No.
Lb. /
100 Pcs.
Catalog
No.
Lb. /
100 Pcs.
3/4" x 6' 23,000 - - C2000053AW 1362 - -
3/4" x 7' 23,000 - 1450 C2000054AW 1470 - -
3/4" x 8' 23,000 C2000049AW 1566 C2000055AW 1650 C2000061AW 1783
3/4" x 9' 23,000 - - C2000056AW 1750 C2000062AW 1883
3/4" x 10' 23,000 C2000050AW 1826 C2000057AW 1910 - -
1" x 7' 36,000 - - C2000114AW - - -
1"x 8' 36,000 C2000051AW 2500 C2000108AW - C2000063AW 2730
1"x 10' 36,000 C2000052AW 3005 C2000059AW 3050 C2000064AW 3270
1-1/4" x 10' 58,000 - - C2000141 5000 - -
1-1/4" x 15' 58,000 - - - - C2000140* 7500
Hubbell Power Systems All contents Copyright© 2001 - Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of continuous product improvement, we reserve the right to change design specifications without notice.
Terms of Use | Contact Us | Site Map | Careers
Anchoring