For sales and support visit:
hubbellpowersystems.com/contact/

Foundation Product Ordering Information

Typical Solar Foundation
With Baseplate
Foundation With Baseplate


Typical Solar Foundation
Without Baseplate

Foundation With Baseplate

 

NOTES
- Apply to both with & without Baseplate -
1. Finish: Hot dip galvanize per ASTM A123; coating Grade 85. Appearance per Section 6.4, except no rack marks.
2. Baseplate Material: Hot rolled steel per ASTM A572 Grade 50; 1/2" thick.
3. Helix Material: Hot rolled steel per ASTM A572 Grade 50; 3/8" thick.
4. Shaft Material: Steel round HSS per ASTM A500 Grade B, minimum yield 50 KSI.
5. Manufacturer to have in effect industry recognized written Quality Control for all materials and manufacturing processes.
6. All welding to be done by welders certified under Section 5 of the AWS Code D1.1.
7. CHANCE® can custom design a helical foundation for given loads and soil conditions, and is not limited to the options shown. For more information, please contact your Hubbell Power Systems representative.

SOLAR-PANEL Foundations Catalog Numbering System

NOTICE: CHANCE® can custom design a helical foundation for given loads and soil conditions, and is not limited to the options shown below. For more information, please contact your Hubbell Power Systems representative.

Example:
CRSBECFFF10B08B = Baseplate Foundation with Helix:
on Pipe Shaft of 6.625" Diameter with .280" Wall thickness; 1 Helix of 12" Diameter; 10 feet Long;
Square & Drilled Baseplate with 8" Maximum Bolt Circle for use with 3/4" Bolts.

 

Hubbell Power Systems All contents Copyright© 2001 - Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of continuous product improvement, we reserve the right to change design specifications without notice.
Terms of Use | Contact Us | Site Map | Careers
Anchoring