• "Bust" Expanding Anchor
• Corrosion-Resistant Anchors
• Cross-Plate Anchor
• No-Wrench Anchor
• RR (Round-Rod) Anchors
• SS (Square-Shaft) Anchors
• Tough One / PISA Anchors
• 
   Other Options
• Catalogs
• eCatalog
• Literature
• myHubbell
• Contact Us

Home › Products › Anchoring › Holding Capacity Charts › Cross-Plate Anchor

Cross-Plate Anchor

Catalog Number	Hole Size In. (mm)	Std. Pkg. / Pallet	Approx. Wt. per Carton Lb. (kg)	Area Sq. In. (Sq cm)	Rod Size (order separately) In. (mm)	Holding Capacity‡ - (lbs. (kN)) (No Safety Factors Included) vs Soil Class
						Class 3	Class 4	Class 5	Class 6	Class 7
X16	16 (406)	6/162	62 (28)	150 (968)	5/8 (15.8), 3/4 (19.1)	26500 (117.9)‡	22500 (100.1)‡	18500 (82.3)‡	14500 (64.5)	9500 (42.3)
X20	20 (508)	4/64	64 (29)	250 (1613)	5/8 (15.8), 3/4 (19.1)	34000 (151.2)‡	29000 (129.0)‡	24000 (106.8)‡	19000 (84.5)‡	14000 (62.3)
X201	20 (508)	4/64	64 (29)	250 (1613)	1 (25.4)	34000 (151.2)	29000 (129.0)	24000 (106.8)	19000 (84.5)	14000 (62.3)
X2434*	24 (610)	1/48	34 (15)	400 (2581)	5/8 (15.8), 3/4 (19.1)	45000 (200.2)‡	37000 (164.6)‡	30000 (133.4)‡	23500 (104.5)‡	18000 (80.1)‡
X24†	24 (610)	1/48	34 (15)	400 (2581)	1 (25.4)	45000 (200.2)‡	37000 (164.6)‡	30000 (133.4)	23500 (104.5)	18000 (80.1)
X241†	24 (610)	1/48	34 (15)	400 (2581)	1-1/4 (31.7)	45000 (200.2)	37000 (164.6)	30000 (133.4)	23500 (104.5)	18000 (80.1)

• †X24 Series are not available in carton and are shipped as individual pieces.
• ‡Ultimate strength of rod may limit holding capacity. (See page 4-17 for rod ratings and selection.)
• Add suffix "G" for galvanized. Example: X20G.
• *RUS Accepted.
• Note: Capacity ratings apply to properly installed anchors only. Failure to install within 5° of alignment with the guy load will significantly lower strength.