Tough One® ANCHOR HELIX ASSEMBLIES
TORQUE RATINGS: 15,000 FT.-LB., AND 10,000 FT.- LB.

Ordering Information

Large Hub (2-1/2" Square Inside)

Tough One® anchors give users high-strength anchor capability in all soils. You get a better anchor at an economical price. With Tough One® anchors, there's little concern about anchor breakage when encountering hard soils.

The anchor's sloped lead point improves penetration and helps soil flow from below the hub to above the anchor.

Tough One® anchors use standard PISA® rods (see page 4-10).

It's easy to upgrade your entire program with Tough One® anchors.

If soil conditions require installations above 10,000 ft.-lbs., you will need our Tough One® wrench system consisting of drive-end assembly, Kelly bar adapter and locking dog assembly. The high-strength system will also install PISA® 6 and 7 anchors. See page 4A-6 for high-strength anchor installing wrench information.

Ordering Information

10,000 ft.-lb. Tough One® anchor

2-1/2" Square Inside Hub

Install with the Chance HYBRID* or Tough One® wrench (see page 4A-4 or 4A-6)

15,000 ft.-lb. Tough One® anchor

2-1/2" Square Inside Hub

Install with only the Chance Tough One® wrench system (Catalog page 4A-6)