For sales and support visit:
hubbellpowersystems.com/contact/

SS200 [16,000 ft. lb. rating]

Square-Shaft "SS" multi-helix screw anchors are designed for heavy-guy loading. They have 2" square steel shafts. Extension shafts must be coupled to the helix section for installation to the proper depth. For installation tool options, see catalog Section 4A.

SS screw anchors consist of three galvanized components: the lead section, the extension shaft, which includes an integral coupling, and the guy adapter. Extensions and guy adapters include a high-strength bolt and nut.

Typical working torque is 16,000 ft.-lb. and minimum ultimate tension strength is 150,000 lb. Note: Ultimate strength ratings apply to properly installed anchors only. Failure to install within 5° of alignment with the guy load will significantly lower strength.

Ordering Information

HIGH-STRENGTH SS ANCHORS for Heavy Tension Loading

High-Strength SS Anchors for Heavy Tension Loading

Ordering Information

RATINGS

Mechanical Properties 2.00" Square Shaft
Max. Installation Torque 16,000 ft.-lb.
Min. Ultimate Tension Strength 150,000 lb.

LEAD SECTIONS

Helix Configuration Galv. L1
6", 8" & 10" C1100569 60"
8", 10" & 12" C1100570 60"
10", 12" & 14" C1100791 84"
14", 14" & 14" C1100572 122"
8", 10", 12" & 14" C1100573 122"
ROCK-IT™ Square Shaft Lead Sections includes forged carbide tip to improve penetration
8", 10" & 12" C1101297 81"

EXTENSIONS

Helix Configuration Galv. L2
None C1100563 37"
None C1100564 58"
None C1100565 80"
None C1100566 123"
Single 14" helix C1100577 45"
Twin 14" helices C1100581 80"
Triple 14" helices C1100586 123"




Catalog No. Description
P0011445P Bolt used with SS200 Extension
and Guy Adapters
P0010030P Nut used with SS200 Extension
and Guy Adapters

TERMINATION ADAPTERS

Adapters Galv. Notes L3 Pulling Eye Rating
Thimpleye Adapter T1100312 (1) Guy Rating 100,000 lbs 17" N/A
Twineye® Adapter - - - -
Tripleye® Adapter T1100629 (1) Guy Rating 100,000 lbs 17" 12,000 lbs
Tripleye® Adapter T1100629A (1) Guy Rating 100,000 lbs 17" N/A
Ovaleye Adapter - - - N/A
Threaded Adapter - - - N/A
Chain Shackle C1100557 L4=2-1/4" 8-1/4" N/A
Hubbell Power Systems All contents Copyright© 2001 - Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of continuous product improvement, we reserve the right to change design specifications without notice.
Terms of Use | Contact Us | Site Map | Careers
Anchoring