hubbellpowersystems.com/contact/
Anchor Drive Heads
- Vehicle Mounted
- Hydraulic Powered
- 6,000 & 11,500 ft.-lb. Torque Ratings
Specially suited for vertical installations of screw-type anchors, foundations, and bumper posts.
The drive head comes in two torque-rating ranges. The design also delivers other features for rugged field conditions.
- Precision planetary gears and bearings in oil-filled, sealed gearcase
- Heavy-duty output housing and bearings
- Heavy-duty bail flange mounted to gearcase housing provides balanced load-sharing torque restraint
- Dual-pin mounting provides drive-head positioning for controlled installations
- Drive-head also readily accepts earth augers for hole digging
Hose assemblies are not furnished with drive heads. For hydraulic flow more than 20 gpm, 3/4"-diameter hose is recommended. For flow rates of 20 gpm and below, 1/2" hose may be used. Swivel joint and swivel joint adapter are furnished. Thread size is 1"-111/2" NPSM (National Pipe Straight Mechanical).
Skid-Steer Utility Plate, Bail and Jib Components
To order, refer to information below. Specify one each: Drive Head, Utility Plate, Bail & Jib Assembly, and Kelly Bar Adapter.
6,000 ft.-lb. maximum torque
For Bobcat Skid-Steers ONLY:
| Catalog No. | Description |
|---|---|
| C3031014 | 6,000 ft.-lb. utility Plate, Bail & Jib Assembly |
Backhoe Mounting Components
To order, specify components in Typical Tool-String Assemblies on next page.6,000 and 11,500 ft.-lb. maximum torque
| Catalog No. | Description |
|---|---|
| C3031016 | 3,500 ft.-lb. Bail & Jib Assembly less utility Plate |
Typical BackhoeTool-Strings
| Dimensions, Inches | Backhoe Brand Name | Catalog Number | Bracket Description | |
|---|---|---|---|---|
| *A | B | |||
| 10.1 | 1.5 | Case | C3030969 | 6K & 11.5K ft.-lb. Eskridge |
| 10.1 | 1 | Case | C3030970 | 3.5K ft.-lb. Eskridge |
| 7 | 1.5 | JCB | C3030971 | 6K & 11.5K ft.-lb. Eskridge |
| 7 | 1 | JCB | C3030972 | 3.5K ft.-lb. Eskridge |
| 8.18 | 1.5 | John Deere | C3030973 | 6K & 11.5K ft.-lb. Eskridge |
| 8.18 | 1 | John Deere | C3030974 | 3.5K ft.-lb. Eskridge |
For booms 7" & 8.18" wide, 2 spacer bushings supplied. Other bushings available for backhoes not listed.
| Catalog Number | Running Torque ft.-lb. | Running Torque Nm | Flow gpm | Speed rpm | Wt. lb. | Wt. kg | Dimensions (in., cm) | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A | B | C | D | E | F | |||||||||||||
| C3030927 | 6,000 @ 2,400 psi | 8,100 @ 165 BARS | 40 | 39 | 246 | 112 | 1.5 | 3.81 | 29.5 | 74.9 | 10.7 | 27.2 | 13 | 33.0 | 11.4 | 28.9 | 2.5 | 6.4 |
| C3030928 | 11,500 @ 2,400 psi | 15,600 @ 165 BARS | 40 | 20 | 246 | 112 | 1.5 | 3.81 | 29.5 | 74.9 | 10.7 | 27.2 | 13 | 33.0 | 11.4 | 28.9 | 2.5 | 6.4 |
|
All contents Copyright© 2001 -
Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of
continuous product improvement, we reserve the right to change design specifications
without notice.
Terms of Use | Contact Us | Site Map |