hubbellpowersystems.com/contact/
Portable Anchor Installers
Portable Anchor Installers for small foundations
2,500 ft.-lb. torque capacity hydraulic power drive
Economical manual operation and portability for remote sites, common anchor installations
For most shaft-driven guy anchors and smaller screw foundations, these compact drivers get into areas where large equipment cannot go or is impractical. Operator does not need to resist the torque generated by anchor installation. Countertorque transmits through a torque bar from the drive head to the earth or other restraint. This frees the operator for the task of guiding the anchor path.
Built-in bypass valve limits output to 2,500-ft.-lb. maximum, two-way foot pedal gives operator direct control over drive and reverse directions, hoses (two 12-ft. and two 25-ft.) come with quick couplers for all connections from power supply to foot control to drive head. Pivoting drive-head yoke connects with bent-arm pin to square-tubular torque bar which telescopes from 8 feet to 10 feet as needed.
Medium Duty - Catalog No. C3031032
| Grease filled gear case. Single Catalog Number above includes all items below. Each item also may be ordered by separate number. | |
|---|---|
| * Hydraulic Control Valve | C3031031 |
| Two 25-ft. Hydraulic Hoses | C4176121 (each) |
| * Hydraulic Drive Head | C3031180 |
| Yoke Assembly | E3030680 |
| * Two 12-ft. Hydraulic Hoses | E3030876 (pair) |
| Square Torque Bar Assembly | E3031041 |
Output shaft is 1-1/2" square socket. Requires C3031230 and flanged drive tool (order separately) to install anchors other than 11/2" square 11/4" round shaft.
* Note: Hydraulic components are not interchangeable between C3031032 and C3031244.
Heavy Duty - Catalog No. C3031244
| Sealed oil-filled gear case. Single Catalog Number above includes all items below. Each item also may be ordered by separate number. | |
|---|---|
| * Hydraulic Control Valve | C3031247 |
| Two 25-ft. Hydraulic Hoses | C4176121 (each) |
| * Hydraulic Drive Head | C3031233 |
| Yoke Assembly | E3030680 |
| * Two 12-ft. Hydraulic Hoses | E3031253 (pair) |
| Square Torque Bar Assembly | E3031041 |
Output Shaft is 2" Hex. - Requires Kelly Bar Adapter P630013 and flanged drive tool (order separately) to install all anchors.
* Note: Hydraulic components are not interchangeable between C3031032 and C3031244.
Anchor Drive Tools
†Note that all 5-1/4" bolt-circle tools may be connected directly to Heavy Duty Portable Anchor Installer Cat. No. C3031244.
†Adapter Tool Cat. No. C3031230 is required to connect 5-1/4" bolt-circle tools to Medium Duty Portable Anchor Installer Cat. No. C3031032. If needed, order Adapter C3031230 as a separate item.
Optional Hydraulic Power Unit Catalog No. C3031201
For easy wheeling to worksite, hydraulic drive head and foot control secure by rubber strap included to angle braces atop the cart frame and hoses ride on handles.
Cart-mounted on 5/8"-diameter axle with two 4.80 x 8 inflatable (30psi) tires; 27-1/4" wide x 34-1/2" high x 36" long; shipping weight with oil: 275 lb.
Hydraulic Pump with fan cooling system:
- Typical output pressure 2500psi
- Pump displacement 8 gpm @ 3400rpm
- Reservoir capacity 5 gallons US
- (shipping cap and vented fill cap provided)
Gasoline Engine System:
- 16hp Briggs & Stratton
- Industrial/Commercial Model 326437, Type 2527
- 12-Volt pushbutton start, 3600rpm (maximum)
- Operating instructions are included with anchor installer and hydraulic power unit.
|
All contents Copyright© 2001 -
Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of
continuous product improvement, we reserve the right to change design specifications
without notice.
Terms of Use | Contact Us | Site Map |