Accessories

Insulating Cap

For installation on 8.3/14.4 kV loadbreak bushing interfaces designed to Fig. 5 of IEEE Standard 386. It can be used as a temporary or a permanent cover on an energized circuit. To avoid low-energy discharge from the outer conductive shield, the 36-inch long braided lead should be grounded.

Insulated Cuff w/ground lead – 215ICI
Conductive Cuff w/ground lead – 215ICC

Insulated Parking Bushing

Provides a temporary or permanent parking position for energized 8.3/14.4 kV loadbreak elbows designed to requirements of Fig. 5 of IEEE Standard 386. The bracket permits mounting on the apparatus parking stands.

Insulated Parking Bushing – 215SB

Feed-thru Insert

This device provides the capability to create a tap position in an existing apparatus installation and convert a radial-feed transformer into a loop-feed unit. Its two loadbreak interfaces, when mated with appropriate products, provide a fully shielded, submersible, separable insulated connection designed for energized operation. It is designed for use on apparatus having a 200-amp bushing well interface meeting the requirements of IEEE Standard 386.

Feed-thru Insert – 215FTI

Grounded Parking Bushing

This set includes a loadbreak bushing and bronze ground clamp T6000466 connected by a 4-ft. yellow 1/0 cable. A tin-plated copper connector joins the cable to the bushing. A threaded copper ferrule connects the cable to the clamp. Fault current rating for each set: 10,000 amps for 10 cycles.

Order Chance T6003091

Grounding Elbow

Each set includes an orange-jacketed elbow, 6 feet of 1/0 copper grounding cable with yellow jacket, and bronze ground clamp T6000466. Fault current rating for each set: 10,000 amps for 10 cycles.

Order Chance C6000729

Test Rod

Fits into switch modules, multi-taps or other loadbreak bushings and is used with test devices such as statiscope to provide indication of energized or deenergized condition of cable.

Order Test Rod 225TR

Three-Phase Grounding Elbow Sets for Switches & Transformers

Each of these sets consists of a three-way terminal block assembly, three 6-ft. lengths of 1/0 copper ground cable with yellow jacket, a bronze ground clamp T6000466 and three elbows. Fault current rating for each set: 10,000 amps for 10 cycles.

Order Chance C6003102