For sales and support visit:
hubbellpowersystems.com/contact/

Home › Products › Connectors › Distribution › Deadends › Bolted (Ferrous) › Circular Deadend Clamp

Circular Deadend Clamp

DEADENDS
BOLTED
CIRCULAR DEADEND CLAMP
FERROUS
DUCTILE IRON
DDC

For deadending static wires.

May be used to deadend copper or Copperweld® phase conductors. Magnetic induction heating will occur.

Material: Body and Keeper-ductile iron, galvanized
Bolts and Washers-galvanized steel (lubricated)
Grommet-neoprene
Clevis Pin-galvanized steel
Sockets and Clevises--ductile iron, hot dip galvanized
Cotter Pin-#302 stainless steel
Spring Clip-zinc plated steel
CATALOG NUMBER FITTING CLAMPING RANGE INCHES (MM) ULTIMATE BODY STENGTH LBS. (KG) DIMENSIONS INCHES (MM) APPROX.
WT. EACH
LBS. (KG)
TYPE CAT. NO. W H
DDC55N None - .16-.55 (4.06-13.97) 16,000 (7,258) 13/16 (20.64) 5-3/16 (131.76) 3.5 (1.59)
DDC55S Socket SA05 4.8 (2.18)
DDC55C Clevis CA05 5.1 (3.09)
CATALOG
NUMBER		 FITTING CLAMPING RANGE
INCHES (MM)		 ULTIMATE
BODY
STENGTH
LBS. (KG)		 DIMENSIONS
INCHES(MM)		 APPROX.
WT. EACH
LBS. (KG)
TYPE CAT. NO. SMALL
GROOVE		 LARGE
GROOVE 		W H
805002000 None - .12-.19
(3.05-4.83)		 .19-.38
(4.83-9.65)		 8,000
(3,628)		 11/16
(17.46)		 2-7/16
(61.91)		 1.5 (.68)
853512000 Socket -
SA04		 .16-.25
(4.06-6.35)		 .25-.44
(6.35-11.18)		 10,000
(4,536)		 11/16
(17.46)		 4-3/4
(120.65)		 2.3 (1.04)
3.8 (1.72)
885002000 None - .20-.50
(5.08-12.70)		 10,000
(4,536)		 11/16
(17.46)		 4-5/16
(109.54)		 2.4 (1.09)
785002000
785012000		 None
Socket		 -
SA04		 .16-.33
(4.06-8.38)		 .33-.55
(8.38-13.97)		 14,000
(6,350)		 3/4
(19.05)		 4-1/4
(107.95)		 3.9 (1.77)
5.4 (2.45)
  • NOTE: Recommended torque on bolts; 1/2"-480 in.-lbs.
Hubbell Power Systems All contents Copyright© 2001 - Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of continuous product improvement, we reserve the right to change design specifications without notice.
Terms of Use | Contact Us | Site Map
Connectors