For sales and support visit:
hubbellpowersystems.com/contact/

Home › Products › Connectors › Substation › EHV › Stud Connectors › Bolted › Stud to 2 Pads (Bifurcating)

Stud to 2 Pads (Bifurcating)

EHV BIFURCATING STUD CONNECTORS
TO TWO FLAT PADS
TYPE EVSF2
ALUMINUM
EVSF2

Aluminum alloy stud to double flat connectors are designed for corona free service at 500 KV. The connectors are designed for use with Type CCL-EHV compression lugs. Stud threads are factory coated with sealant and connectors are individually sealed in plastic bag. Terminal clamping hardware is not furnished as part of this catalog number. This connector is designed to clamp terminal pads of a maximum thickness of 1". To assure corona free performance, tap terminal must be connected. Tongue holes have NEMA spacing. Contact sealant is recommended.

For pads in horizontal plane, add "-90" after stud size in number (Example - EVSF2-20-90-12-18)

Material: Castings – 356-T6 aluminum alloy
Stud Clamping Hardware – aluminum alloy
Note: Contact factory to obtain stud body at special angles.
345 KV AND 500KV LINE-TO-LINE APPLICATIONS
CATALOG
NUMBER		 STUD DIA. IN./THD DIMENSIONS – INCHES (MM) APPROX.
WT. EA.
LBS. (KG)
B L
EVSF2-14-12-12 1-1/2-12 12 (304.80) 19-1/8 (485.78) 26.4 (11.98)
EVSF2-14-12-18 1-1/2-12 18 (457.20) 25-1/8 (638.18) 28.8 (13.06)
EVSF2-20-12-12 2-12 12 (304.80) 19-1/8 (485.78) 26.0 (11.79)
EVSF2-20-12-18 2-12 18 (457.20) 25-1/8 (638.18) 28.8 (13.06)
EVSF2-30-12-12 3-12 12 (304.80) 19-1/8 (485.78) 27.2 (12.35)
EVSF2-30-12-18 3-12 18 (457.20) 25-1/8 (638.18) 30.1 (13.67)
Hubbell Power Systems All contents Copyright© 2001 - Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of continuous product improvement, we reserve the right to change design specifications without notice.
Terms of Use | Contact Us | Site Map
Connectors