Fargo Universal Jointing Compound has been specifically designed for tension applications for compression transmission fittings to fill the internal voids, sealing out moisture and air.

UJC mineral oil based compound is suitable for standard aluminum conductor (AAC and ACSR) fittings.

See application guide for more information.

See table labeled "Joint Compound Required" for Fargo transmission fittings.

See table labeled "Inhibitor Application Guide" for part number selection.

Fargolene® inhibitors are specially compounded corrosion inhibitors recommended for the contact surfaces of all electrical connections to seal out moisture and protect the joint.

• Stable over a wide range of temperatures.
• Available in gritted and non-gritted formulations.
• Organic and synthetic base varieties.
• Workable at subfreezing temperatures and will adhere to cold metal surfaces permitting easy application either directly on the contact surfaces from the squeeze bottle or by troweling with a knife.
• Water repellent, weather resistant, and inert to copper, aluminum, zinc, tin, cadmium, steel, and neoprene rubber; providing a stable compatible corrosion inhibitor.
• On grit bearing inhibitor, the fine powdered grit punctures through high resistance oxide films, improving the electrical connection, as well as the mechanical holding strength.
• For the very best results, a thorough cleaning of the conductor and connector contact areas and a liberal application of Fargolene inhibitor is recommended.

See application guide for more information.

See table labeled "Inhibitor Application Guide" for part number selection.