Aluminum Connectors for Cable*

Conductor Range
Catalog Number Code	Aluminum Copper AWG-MCM	ACSR AWG-MCM	Decimal Range Inches
6**	#4-1/0 - 250-400	#4-1/0-4/0	.232 - .398
7	350-600	4/0 - 336.4	.368 - .575
9	600-900	336.4 - 477	.563 - .744
11	900-1250	556.5 - 795.5	.681 - .893
13	1250-1600	715.5 - 1113	.870 - 1.108
15	1500-2000	1113 - 1272	1.081 - 1.293
16	2000-2500	1272 - 1590	1.289 - 1.459
18	2500-3000		1.382 - 1.632
21	-	*Decimal Range	1.632 - 1.824
22	-		1.824 - 2.000 2.000 - 2.200

**Multi-rancge is accomplished by reversing the clamping cap.
*The decimal range is to be considered the final criteria for application. The ACSR and aluminum cable ranges will not necessarily fall within the decimal range for all standings.

Bronze Connectors for Cable

Vers-A-Groove Cap Number	Cable Range				Decimal Range Inches
	Small Groove		Large Groove
	Min.	Max.	Min.	Max.
022	#6	#2	#2	2/0	.162 - .419
025	#4	1/0	2/0	250 MCM	.204 - .575
050	1/0 Sol.	4/0 Str.	250	500 MCM	.325 - .813
080	2/0 Sol.	500 MCM	500	800 MCM	.365 - 1.031
100	4/0 Str.	750 MCM	750	1000 MCM	.522 - 1.152
150	250	750 MCM	750	1500 MCM	.474 - 1.412
200	500	1500 MCM	1500	2000 MCM	.811 - 1.632

Bronze Reversible Cable Caps

Unless otherwise indicated all bronze cable connectors have cable sections designed to accommodate a range of conductors. Their wide applications flexibility offers the distinct advantages of reducing stock inventory, and possibility or errors of misapplication. There is no sacrifice of either electrical or mechanical efficiency when using reversible cable caps. This design is field proven by years of trouble free service in locations where severe operating conditions exist.

Our four bolt reversible cable cap design is adequate for high current capacity conductors, yet priced in line with standard duty connectors.

Copper or Aluminum Flat Bar

Code No.	Width In Inches*
10	1
14	1 1/2
20	2
24	2 1/2
30	3
34	3 1/2
40	4
50	5
60	6
80	8
100	10
120	12

*Bar thickness & spacing (if same) are added at end of completed catalog number as "14," "12," etc...

Copper or Aluminum IPS Tubing

Code No.	IPS Diameter
02	1/4
03	3/8
04	1/2
06	3/4
10	1
12	1 1/4
14	1 1/2
20	2
24	2 1/2
30	3
34	3 1/2
40	4
44	4 1/2
50	5
60	6

Copper or Aluminum Threaded Studs

Code No.	Diameter In Inches*
01	1/8
02	1/4
03	3/8
04	1/2
05	5/8
06	3/4
07	7/8
10	1
11	1 1/8
12	1 1/4
13	1 3/8
14	1 1/2
15	1 5/8
16	1 3/4
17	1 7/8
20	2
21	2 1/8
22	2 1/4
23	2 3/8
24	2 1/2
26	2 3/4
30	3
32	3 1/4
34	3 1/2
36	3 3/4
40	4
50	5
60	6

*Threads per inch are added at the end of completed cataolg number as "12," "16," etc. smooth studs are specified by adding "0."