For sales and support visit:
hubbellpowersystems.com/contact/

Damper Part Numbers

DAMPERS/SPACERS
VIBRATION DAMPER
4R STOCKBRIDGE
ALUMINUM
607

Fargo 4-R vibration dampers effectively prevent fatigue damage to conductor and static wires caused by wind-induced aeolian vibration.

Messenger Cable: Materials and stranding are selected to obtain the best energy absorption characteristics. The galvanized steel messenger is manufactured to rigid engineering standards.

Weights: Uniquely shaped so that the resonant peaks are effectively distributed over the desired frequency range. All weights are given a corrosion resistant finish and have smooth surfaces and rounded edges to eliminate possible corona discharge.

Clamp: The bolted clamp permits easy installation on a wide range of conductor sizes. Minimum distortion of conductor strands is controlled by careful anvil and keeper design.

DAMPER SELECTION CLAMPING
BOLT
TORQUE
DIMENSIONS IN (MM) WEIGHT EACH
LB (KG)
STD PKG
CATALOG NUMBER (1) CABLE DIA. RANGE (2) A B C
IN. MM FT-LB
607048 0.250
to
0.438
6.35
to
11.12
20 11.1 (282) 2.38 (60) 1.75 (44) 2.8 (1.3) 10
607051011 0.439
to
0.858
11.12
to
21.8
25 16.1 (409) 2.69 (68) 1.75 (44) 4.8 (2.2) 6
6070511 0.610
to
0.858
15.5
to
21.8
25 16.1 (409) 3.18 (81) 1.75 (44) 4.8 (2.2) 6
6071012 0.859
to
1.130
21.8
to
28.7
25 20.0 (508) 2.91 (74) 2.26 (57) 9.0 (4.1) 6
6071513 1.131
to
1.425
28.7
to
36.2
25 21.9 (556) 3.78 (96) 2.82 (72) 15.7 (7.1) 4
6072014 1.426
to
1.770
36.2
to
44.9
40 24.0 (610) 5.92 (150) 3.54 (90) 22.0 (10) 3
Hubbell Power Systems All contents Copyright© 2001 - Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of continuous product improvement, we reserve the right to change design specifications without notice.
Terms of Use | Contact Us | Site Map
Connectors