For sales and support visit:
hubbellpowersystems.com/contact/

Home › Products › Connectors › Transmission › Suspension Clamps › Bolted (Ductile-Iron) › Angle Clamp

Angle Clamp

SUSPENSION
DUCTILE IRON ANGLE CLAMP
DUCTILE IRON

Intended for use in angle construction with galvanized steel overhead ground wire or copper and copperweld phase wire. Magnetic induction heating will occur.

Material: Body and Keeper-ductile iron, galvanized
Hardware-hot dip galvanized steel
Cotter Pin-#302 stainless steel
Grommet-neoprene
CATALOG NUMBER CLAMPING RANGE
INCHES (MM)		 ULTIMATE BODY
STRENGTH
LBS. (KN)		 MAX.
TAKE-OFF
ANGLE		 APPROX. WT.
EACH LBS. (KG)
SMALL GROOVE LARGE GROOVE 0
814602000
828602000		 .162-.25
(4.11-6.35)		 .25-.60
(6.35-15.24)		 7,000
(31)		 60° 1.5
(.68)
  • NOTE: Recommended torque on 1/2" bolt-480 in. lbs.
Hubbell Power Systems All contents Copyright© 2001 - Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of continuous product improvement, we reserve the right to change design specifications without notice.
Terms of Use | Contact Us | Site Map
Connectors