Hubbell Power Systems - Products for Electric Utilities, Telecommunications and Construction Industries

For sales and support visit:
hubbellpowersystems.com/contact/

Tee Taps

Cable to Pad - Open Run (ACSS / TW)

TEE TAPS
COMPRESSION
CABLE TO PAD - OPEN RUN
ACSS/TW CONDUCTORS

ALUMINUM
ORT21STW

Tee taps listed below are rated for use on ACSS/TW conductors when installed with FARGO type HTJC, high-temperature joint compound.

Tap pad holes have NEMA spacing.

Material:	Aluminum Alloy
Identification:	CONDUCTOR TYPE & DIAMETER RANGE DIE SIZE, MINIMUM PRESS SIZE PART NUMBER DATE CODE

FARGO CATALOG NUMBER	ACSS/TW CONDUCTOR RANGE		PAD DETAILS		LENGTH BEFORE COMPR. IN (MM)	DIE SIZE (1)	MIN. PRESS (TONS)	NET WEIGHT LB (KG)
FARGO CATALOG NUMBER	O.D. IN / (MM)	KCMIL SIZE (TYPE)	BOLT HOLES	WIDTH IN (MM)	LENGTH BEFORE COMPR. IN (MM)	DIE SIZE (1)	MIN. PRESS (TONS)	NET WEIGHT LB (KG)
ORT2107STW ORT2107CSTW	0.547-0.611 (13.9 - 15.5)	266.8 (T16)	2 4	2.0 (51) 3.0 (76)	12.7 (323) 13.7 (348)	07CD	12	0.90 (0.41) 0.97 (0.44)
ORT2108STW ORT2108CSTW	0.630-0.695 (16.0 - 17.7)	336.4 (T16 & T23)	2 4	2.0 (51) 3.0 (76)	13.5 (343) 14.5 (368)	08CD 76AH	12	1.1 (0.50) 1.2 (0.60)
ORT2109STW ORT2109CSTW	0.702-0.776 (17.8 - 19.7)	397.5 (T13 & T16), 477 (T13)	2 4	2.0 (51) 3.0 (76)	15.6 (398) 16.6 (422)	09CD	12	1.5 (0.68) 1.6 (0.73)
ORT2110STW ORT2110CSTW	0.789-0.858 (20.0 - 21.8)	477 (T16 & T23), 556.5 (T13 & T16), 565.3 (T16), 571.7 (T13)	2 4	2.0 (51) 3.0 (76)	16.3 (414) 17.3 (439)	10CD 24AH	60	1.9 (0.86) 2.0 (0.91)
ORT2111STW	0.880-0.930 (22.4 - 23.6)	636 (T13 & T16), 664 (T16), 666 (T13)	4	3.0 (76)	18.1 (459)	11CD	60	2.6 (1.18)
ORT2112STW ORT2112DSTW	0.960-1.010 (24.4 - 25.7)	762.8 (T13 & T16), 795 (T7, T13 & T16)	4	3.0 (76) 4.0 (102)	19.5 (495) 20.5 (521)	12CD	60	3.3 (1.50) 3.5 (1.59)
ORT2113STW ORT2113DSTW	1.046-1.108 (26.6 - 28.1)	795 (T23)	4	3.0 (76) 4.0 (102)	21.3 (541) 22.3 (566)	13CD 30AH	60	3.9 (1.77) 4.1 (1.86)
ORT2113STW ORT2113DSTW	1.046-1.108 (26.6 - 28.1)	795 (T23), 900 (T13), 954 (T7 & T13), 959.6 (T16), 966.2 (T13, 1033.5 (T7)	4	3.0 (76) 4.0 (102)	21.3 (541) 22.3 (566)	13CD	60	3.9 (1.77) 4.1 (1.86)
ORT2114STW ORT2114DSTW	1.125-1.196 (28.6 - 30.4)	1033.5 (T13), 1113 (T7 & T13), 1158 (T7), 1158.4 (T13), 1192.5 (T7)	4	3.0 (76) 4.0 (102)	22.2 (564) 23.3 (589)	14CD 34AH	60	5.1 (2.31) 5.3 (2.40)
ORT2115STW ORT2115DSTW	1.212-1.300 (30.8 - 33.0)	1192.5 (T13), 1233.3 (T13), 1272 (T7 & T13), 1351.5 (T7 & T13), 1431 (T7)	4	3.0 (76) 4.0 (102)	24.0 (610) 25.0 (635)	15CD 36AH	60	5.9 (2.67) 6.1 (2.77)
ORT2116STW ORT2116DSTW	1.290-1.382 (32.8 - 35.1)	1431 (T7 & T13), 1433.6 (T13) 1533.3 (T13), 1590 (T7)	4	3.0 (76) 4.0 (102)	25.0 (635) 26.0 (660)	16CD 38AH	60	8.1 (3.67) 8.3 (3.76)
ORT2117STW	1.385-1.455 (35.2 - 37.0)	1590 (T13), 1657.4 (T7), 1780 (T8)	4	4.0 (102)	26.0 (660)	17CD 40AH	60	8.5 (3.88)
ORT2119STW	1.504-1.608 (38.2 - 40.8)	1926.9 (T13), 1949.6 (T7)	4	4.0 (102)	28.8 (732)	19CD 44AH	100	11.3 (5.13)
ORT2119STW	1.504-1.608 (38.2 - 40.8)	2156 (T8)	4	4.0 (102)	28.8 (732)	19CD	100	11.3 (5.13)

NOTES:

(1) Hex dies not available for some sleeve & conductor combinations. If no AH die listed for conductor, use only the CD die shown.
(2) Install with Fargo type HTJC inhibitor compound.
(3) Tees are suitable for EHV applications on conductors over 1 in. (25.4 mm) O.D.

All contents Copyright© 2001 - Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of continuous product improvement, we reserve the right to change design specifications without notice.
Terms of Use | Contact Us | Site Map