For sales and support visit:
hubbellpowersystems.com/contact/

Home › Products › Connectors › Transmission › Tee Taps › Cable to Pad - Open Run (ACSS)

Cable to Pad - Open Run (ACSS)

TEE-TAPS
COMPRESSION
CABLE TO PAD - OPEN RUN
ACSS CONDUCTORS
ALUMINUM
ORT21SSAC

Tee taps listed below are rated for use on ACSS conductors when installed with FARGO type HTJC, high-temperature joint compound.

Tap pad holes have NEMA spacing.

Material: Aluminum Alloy
Identification: CONDUCTOR TYPE &
DIAMETER RANGE
DIE SIZE, MINIMUM PRESS SIZE
PART NUMBER
DATE CODE
FARGO
CATALOG
NUMBER		 CONDUCTOR RANGE PAD DETAILS LENGTH
BEFORE
COMPR. IN
(MM)		 DIE
SIZE (1)		 MIN.
PRESS
(TONS)		 NET
WEIGHT
LB (KG)
O.D. IN
(MM)		 ACSS SIZE
KCMIL (STR)		 BOLT
HOLES		 WIDTH
IN (MM)
ORT2107SSAC ORT2107CSSAC 0.595-0.679 (15.1 - 17.2) 266.8 (18/1) (6/7) (26/7) 2 4 2.0 (51) 3.0 (76) 12.7 (323) 13.7 (348) 07CD 12 0.90 (0.41) 0.97 (0.44)
ORT2108SSAC ORT2108CSSAC 0.680-0.765 (17.3 - 19.4) 336.4 (18/1) (26/7) (30/7), 397.5 (18/1) 2 4 2.0 (51) 3.0 (76) 13.5 (343) 14.5 (368) 08CD 76AH 12 1.1 (0.50) 1.2 (0.60)
ORT2109SSAC ORT2109CSSAC 0.766-0.855 (19.5 - 21.7) 397.5 (24/7) (26/7) (30/7), 477 (18/1) (24/7) 2 4 2.0 (51) 3.0 (76) 15.6 (396) 16.6 (422) 09CD 12 1.5 (0.68) 1.6 (0.73)
ORT2110SSAC ORT2110CSSAC 0.856-0.950 (21.7 - 24.1) 477 (26/7) (30/7), 556.5 (18/1) (24/7) (26/7), 636 (18/1) (36/1) 2 4 2.0 (51) 3.0 (76) 16.3 (414) 17.3 (439) 10CD 24AH 60 1.9 (0.86) 2.0 (0.91)
ORT2111SSAC 0.950-1.045 (24.2 - 26.5) 556.5 (30/7), 605 (24/7) (26/7) (30/19), 636 (18/1) (24/7) (26/7) (30/19), 666 (24/7) (26/7), 715.5 (24/7) 4 3.0 (76) 18.1 (459) 11CD 60 2.6 (1.18)
ORT2112SSAC ORT2112DSSAC 1.026-1.131 (26.1 - 28.7) 715.5 (24/7) (26/7) (30/19), 795 (24/7) (26/7) (45/7) (54/7), 900 (45/7) 4 3.0 (76) 4.0 (102) 19.5 (495) 20.5 (521) 12CD 60 3.3 (1.50) 3.5 (1.59)
ORT2113SSAC ORT2113DSSAC 1.140-1.235 (29.0 - 31.4) 795 (30/19) 4 3.0 (76) 4.0 (102) 21.3 (541) 22.3 (566) 13CD 30AH 60 3.9 (1.77) 4.1 (1.86)
795 (30/19), 900 (54/7), 954 (45/7) (54/7), 1033.5 (36/1) (45/7) 13CD
ORT2114SSAC ORT2114DSSAC 1.236-1.330 (31.5 - 33.8) 954 (30/19), 1033.5 (54/7), 1113 (45/7) (54/19), 1192.5 (45/7) 4 3.0 (76) 4.0 (102) 22.2 (564) 23.3 (589) 14CD 34AH 60 5.1 (2.31) 5.3 (2.40)
ORT2115SSAC ORT2115DSSAC 1.331-1.425 (33.9 - 36.2) 1192.5 (54/19), 1272 (45/7) (54/19), 1351.5 (45/7) (54/19) 4 3.0 (76) 4.0 (102) 24.0 (610) 25.0 (635) 15CD 36AH 60 5.9 (2.67) 6.1 (2.77)
ORT2116SSAC ORT2116DSSAC 1.426-1.520 (36.3 - 38.6) 1431 (45/7) (54/19), 1510.5 (45/7) (54/19), 1590 (45/7) 4 3.0 (76) 4.0 (102) 25.0 (635) 26.0 (660) 16CD 38AH 60 8.1 (3.67) 8.3 (3.76)
ORT2117SSAC 1.521-1.615 (38.7 - 41.0) 1590 (54/19), 1780 (84/19), 1869 (68/7) 4 4.0 (102) 26.0 (660) 17CD 40AH 60 8.5 (3.86)
ORT2119SSAC 1.630-1.805 (41.4 - 45.8) 2034.5 (72/7), 2057 (76/19), 2167 (72/7) 4 4.0 (102) 28.8 (732) 19CD 44AH 100 11.3 (5.13)
2156 (84/19), 2312 (76/19) 19CD
NOTES:
  • (1) Hex dies not available for some sleeve & conductor combinations. If no AH die listed for conductor, use only the CD die shown.
  • (2) Install with Fargo type HTJC inhibitor compound.
  • (3) Tees are EHV rated where main conductor is 1.0 in. (25.4 mm) O.D. or larger, and pad connection is shielded.
Hubbell Power Systems All contents Copyright© 2001 - Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of continuous product improvement, we reserve the right to change design specifications without notice.
Terms of Use | Contact Us | Site Map
Connectors