For sales and support visit:
hubbellpowersystems.com/contact/

Home › Products › Connectors › Transmission › Tee Taps › Cable to Pad - Open Run (AAC, Alloy, ACAR & ACSR)

Cable to Pad - Open Run (AAC, Alloy, ACAR & ACSR)

TEE-TAPS
COMPRESSION
CABLE TO PAD - OPEN RUN
AAC, AAAC, ACAR AND ACSR CONDUCTORS
ALUMINUM
ORT21

Tee connectors are sealed in UV resistant clear plastic. Pad holes have NEMA spacing.

Material: Seamless Extruded Aluminum Alloy Tube
Pad—Pure Cast Aluminum
Identification: CONDUCTOR TYPE &
DIAMETER RANGE
DIE SIZE, MINIMUM PRESS SIZE
PART NUMBER
DATE CODE
345 KV AND 500 KV LINE-TO-LINE APPLICATIONS
FARGO
CATALOG
NUMBER		 CONDUCTOR RANGE (1) PAD DETAILS LENGTH
BEFORE
COMPR.
IN (MM)		 DIE
SIZE (2)		 MINI-MUM
PRESS
(TONS)		 NET
WEIGHT
LB (KG)
O.D. IN/(MM) AAC SIZE
KCMIL		 ACSR SIZE
KCMIL (STR)		 BOLT
HOLES		 WIDTH
IN (MM)
ORT2107 0.595 - 0.679
(15.1 - 17.2)		 300, 336.4, 350 266.8 (18/1) (6/7) (26/7) 2 2.0 (51) 11.3 (287) 07CD 12 0.84 (0.37)
ORT2108 0.680 - 0.765
(17.3 - 19.4)		 350, 397.5, 400 336.4 (18/1) (26/7) (30/7),
397.5 (18/1)		 2 2.0 (51) 12.7 (323) 08CD 12 1.1 (0.48)
ORT2109
ORT2109C		 0.766 - 0.855
(19.5 - 21.7)		 450, 477, 500, 550 397.5 (24/7) (26/7) (30/7),
477 (18/1) (24/7)		 2
4		 2.0 (51)
3.0 (76)		 13.4 (340)
14.4 (366)		 09CD 12 1.4 (0.61)
1.5 (0.65)
ORT2110
ORT2110C		 0.856 - 0.950
(21.7 - 24.1)		 556.5, 600,
636, 650		 477 (26/7) (30/7),
556.5 (18/1) (24/7) (26/7),
636 (18/1) (36/1)		 2
4		 2.0 (51)
3.0 (76)		 14.3 (363)
15.3 (389)		 10CD
24AH		 60 1.7 (0.74)
1.8 (0.78)
ORT2111 0.950 - 1.045
(24.2 - 26.5)		 700, 715.5, 750 556.5 (30/7),
605 (24/7) (26/7) (30/19),
636 (18/1) – (30/19),
666 (24/7) (26/7),
715.5 (24/7)		 4 3.0 (76) 16.3 (414) 11CD 60 2.5 (1.09)
ORT2112
ORT2112D		 1.026-1.131
(26.1 - 28.7)		 795,
800,
874.5,
900,
954		 715.5 (24/7) (26/7) (30/19),
795 (24/7) (26/7) (45/7) (54/7),
795 (36/1),
900 (45/7)		 4 3.0 (76)
4.0 (102)		 17.3 (439)
18.3 (465)		 12CD 60 3.1 (1.35)
3.3 (1.50)
ORT2113
ORT2113D		 1.140 - 1.235
(29.0 - 31.4)		 1000,
1033.5		 795 (26/7) (30/19) 4 3.0 (76)
4.0 (102)		 18.5 (470)
19.5 (495)		 13CD 30AH 60 3.6 (1.57)
3.8 (1.66)
1100,
1113		 900 (54/7),
954 (45/7) (54/7),
1033.5 (36/1) (45/7)		 4 13CD
ORT2114
ORT2114D		 1.236-1.330
(31.5 - 33.8)		 1192.5,
1200,
1250,
1272,
1300		 954 (30/19),
1033.5 (54/7),
1113 (45/7) (54/19),
1192.5 (45/7)		 4 3.0 (76)
4.0 (102)		 19.8 (503)
20.8 (528)		 14CD
34AH		 60 4.6 (2.00)
4.8 (2.09)
ORT2115
ORT2115D		 1.331-1.425
(33.9 - 36.2)		 1351.5,
1400,
1431,
1500,
1510.5		 1192.5 (54/19),
1272 (45/7) (54/19),
1351.5 (45/7) (54/19)		 4 3.0 (76)
4.0 (102)		 20.7 (526)
21.7 (551)		 15CD
36AH		 60 5.5 (2.40)
5.7 (2.48)
ORT2116
ORT2116D		 1.426-1.520
(36.3 - 38.6)		 1590,
1600,
1700		 1431 (45/7) (54/19),
1510.5 (45/7) (54/19),
1590 (45/7)		 4 3.0 (76)
4.0 (102)		 21.6 (549)
22.6 (574)		 16CD 38AH 60 6.1 (2.66)
6.3 (2.74)
ORT2117 1.521-1.615
(38.7 - 41.0)		 1750,
1800,
1900		 1590 (54/19),
1780 (84/19),
1869 (68/7)		 4 4.0 (102) 23.5 (597) 17CD 40AH 60 7.8 (3.40)
ORT2119 1.630-1.805
(41.4 - 45.8)		 2000,
2250,
2300		 2034.5 (72/7),
2057 (76/19),
2167 (72/7)		 4 4.0 (102) 25.4 (645) 19CD 44AH 100 10.2 (4.43)
– 2156 (84/19),
2312 (76/19)		 4 19CD
  • NOTES:
  • (1) These tee taps also approved application on AAAC and ACAR conductors within the diameter ranges listed.
  • (2) Hex dies not available for some sleeve & conductor combinations. If no AH die listed for conductor, use only the CD die shown.
  • (3) Install with Fargo type UJC or, for lowest resistance connection, type HTJC inhibitor compound.
  • (4) Tees are EHV rated where conductor is 1.0 in. (25.4 mm) O.D. or larger, and pad connection is shielded.
Hubbell Power Systems All contents Copyright© 2001 - Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of continuous product improvement, we reserve the right to change design specifications without notice.
Terms of Use | Contact Us | Site Map
Connectors