For sales and support visit:
hubbellpowersystems.com/contact/

Home › Products › Fiberglass Construction › Standoff Brackets › Cutout / Arrester Bracket (Single-Phase) › 2 Position (0°) with Hardware & Spacer Bar

2 Position Single-Phase C/A Bracket (0°) with Hardware & Spacer Bar

  • Base design permits bolting or banding to structure.
  • Base is aluminum alloy.
  • End fitting is hot-dip-galvanized ductile iron.
Catalog Number Length A Minimum Ultimate* Weight (Each)
Vertical V Longitudinal L Transverse T
Medium Duty 1.5 (38 mm) Dia. Rod
1SBM12SGLSB 12" (30.5 cm) 2100 lbs. (953 kg) 900 lbs. (408 kg) 5000 lbs. (2268 kg) 4.6 lbs. (2.1 kg)
1SBM15SGLSB 15" (38.1 cm) 1800 lbs. (816 kg) 800 lbs. (363 kg) 5000 lbs. (2268 kg) 5.0 lbs. (2.3 kg)
1SBM18SGLSB 18" (45.7 cm) 1500 lbs. (680 kg) 700 lbs. (318 kg) 5000 lbs. (2268 kg) 5.4 lbs. (2.4 kg)
1SBM21SGLSB 21" (53.3 cm) 1200 lbs. (544 kg) 600 lbs. (272 kg) 5000 lbs. (2268 kg) 5.8 lbs. (2.6 kg)
1SBM24SGLSB 24" (61 cm) 900 lbs. (408 kg) 500 lbs. (227 kg) 5000 lbs. (2268 kg) 6.2 lbs. (2.8 kg)
  • *Recommended maximum working load is 50% of minimum ultimate ratings listed.
  • Consult factory for additional lengths.
  • **Spacer bar shown turned 90° to normal assembled position; may be shipped disassembled from main bracket.
Hubbell Power Systems All contents Copyright© 2001 - Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of continuous product improvement, we reserve the right to change design specifications without notice.
Terms of Use | Contact Us | Site Map