
Home › Products › Insulators › Transmission › Deadends / Suspension › Quadri*Sil › Corona Rings
Quadri*Sil™ insulators are RIV and corona free through 161 kV. The use of an external corona shielding ring is required at 220 / 230 kV and above. The table below details the rings necessary for 220 / 230 kV and above.
| Line Voltage (kV) |
Recommended Corona Rings by Line Voltage |
Corona Ring Part Numbers | ||||
|---|---|---|---|---|---|---|
| 25 kip, 30 kip, 120 kN, 133 kN | 50 kip, 160 kN, 210 kN | |||||
| Ground End | Line End | Ground End | Line End | Ground End | Line End | |
| 220/230 kV | None | 8" (203 mm) | - | 2717613001 | - | 2717613002 |
| 330/345 kV | None | 12" (305 mm) | - | 2717053001 | - | 2717053002 |
| 400 kV | 8" (203 mm) | 12" (305 mm) | 2717613001 | 2717053001 | 2717613002 | 2717053002 |
| 500 kV | 8" (203 mm) | 15" (381 mm) | 2717613001 | 2717513001 | 2717613002 | 2717513002 |
| Physical and Electrical Characteristics | 220/230 kV Ring | 330/345 kV Ring | 400 kV Ring | 500 kV Ring |
|---|---|---|---|---|
| Dry Arc Distance inches (mm) | -0.63 (-16) | -1.32 (33.5) | -1.95 (49.5) | -2.67 (67.8) |
| Leakage Distance inches (mm) | 0 | 0 | 0 | 0 |
| ANSI 60 Hz Flashover Dry — kV | -10 | -20 | -20 | -30 |
| ANSI 60 Hz Flashover Wet — kV | -10 | -10 | -20 | -30 |
| ANSI Critical Flashover Positive — kV | -10 | -20 | -30 | -40 |
| ANSI Critical Flashover Negative — kV | -10 | -20 | -30 | -50 |
| IEC Wet Switching Impulse Withstand — kV | N/A | N/A | N/A | N/A |
| IEC Power Frequency Wet Withstand — kV | -10 | -10 | -20 | -30 |
| IEC Lightning Impulse Withstand Positive — kV | -10 | -20 | -30 | -40 |
| IEC Lightning Impulse Withstand Negative — kV | -10 | -20 | -30 | -50 |
| Net Weight pounds (kg) | 2.1 (1.0) | 2.9 (1.3) | 5.0 (2.3) | 6.5 (2.9) |
|
|
All contents Copyright© 2001 -
Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of
continuous product improvement, we reserve the right to change design specifications
without notice.
Terms of Use | Contact Us | Site Map |
