Bronze clamp is used to ground the bottom hinge contact on cutouts used on distribution riser poles or where grounding is required. It fits these cutouts: Chance F2, F3, and C Cutouts; Westinghouse LDX, Southern States B-80; Southern States Series 63; Joslyn; S&C Type SX; McGraw-Edison LMO, and GE Durabute.

Clamp can be installed with or without grounding cable to aid as a warning and possibly avoid accidental closing of cutout.

Clamp's drilled terminal accepts threaded-stud cable ferrules. It also accepts threaded L-Stud and T-Stud Terminals (3/4" diameter bronze) for use with conventional ground-clamp cable sets

Fault Current rating: 20,000 amps for 30 cycles

Catalog No.	Description	Weight, each
C6000785	Cutout Clamp	2 lb./0.9 kg.
C6000862	Cutout Clamp with L-Stud	3 lb./1.4 kg.
C6000841	L-Stud Terminal only	1 lb./0.5 kg.
T6002408	T-Stud Terminal only	1-1/2 lb./0.68 kg.