with Pressure-Type Terminals

This is a complete tool set for grounding substation bus, when de-energized for maintenance. Features of this set make the workmen's job safer and easier.

Large capacity bus clamps are available in mounted versions to reach any manageable height. To increase the worker's lifting capabilities, a plastisol coated, Shepherd Hook Lift Stick, with block and rope assembly reduce the capacity clamps on the overhead bus.

Two sizes of mounted clamps are available. The C6000618 has a 6-5/8" bus capacity, utilizing a C6000337 ground clamp mounted on a 1-1/4" x 9 ft. Epoxiglas® Pole.

The C6000619 has a 4" bus capacity, utilizing a G3369 ground clamp mounted on a 1-1/4" x 8'10" Epoxiglas® Pole.

Cables, ferrules and small grounding clamps should be ordered separately.

Accessories

C6000617	Lift Hook Assembly, 1-1/4" x 8'8" Epoxiglas® pole, includes block and rope assembly.
C6000620	1-1/4" x 12' Extension Pole (middle section).
C6000621	1-1/4" x 8' Bottom Pole.

Catalog Number	C6000618	C6000619
ELECTRICAL RATINGS
Continuous Current (AMPS)	400	400
Fault Current - 15 Cycles (AMPS)	43,000	43,000
Fault Current - 30 Cycles (AMPS)	30,000	30,000
MECHANICAL RATINGS
Recommended Torque (in.-lb.)	250	250
Main Line Range - Max.	6-5/8" Angles	4-1/2" Angles
Main Line Range - Min.	4-1/2" Round Bus	1/0 Str. Copper (0.368")
Jumper Range - Max.	4/0 Grd. Cable w/Plain Plug	4/0 Grd. Cable w/Plain Plug
Jumper Range - Min.	#2 Grd. Cable w/Plain Plug	#2 Grd. Cable w/Plain Plug
Weight Each	10 lb./4.5 kg.	9-1/4 lb./4.2 kg.
ASTM Designation	Type II Class A Grade 5	Type II Class A Grade 5