For sales and support visit:
hubbellpowersystems.com/contact/

Home › Products › Lineman Grade Tools › Insulated Hand Tools › Insulated Socket Drive › All-Angle Cog Wrench

All-Angle Cog Wrench

15 ft.-lb. maximum torque rating

Tested per OSHA & ASTM F711

Controls on the Chance All-Angle Cog Wrench permit operator efficiency in locating the wrench on energized hardware. The hand-grip steadies the tool and holds the cog housing in place while the pole is rotated, turning the the cogs to engage the wrench on the nut or bolt.

The angle of the wrench head in relation to the handle is adjustable within a range of 140 degrees. Wing nuts on either side of the head tighten to hold the head in a friction-locked position during use.

This Chance Epoxiglas Hot Line Tool is 1-1/2" in diameter with a 3/8" diameter fiberglass control rod. The hand-grip is aluminum alloy, the cog housing is bronze alloy and the gears are hardened steel.

Catalog No. All-Angle Cog Wrench Description Approximate Weight
C4030184 6-foot length 7 lb./3.2 kg.
C4030185 8-foot length 7-1-2 lb./3.4 kg.
C4030186 10-foot length 8 lb./3.6 kg.
PSC4030187 12-foot length 9 lb./4.1 kg.
Hubbell Power Systems All contents Copyright© 2001 - Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of continuous product improvement, we reserve the right to change design specifications without notice.
Terms of Use | Contact Us | Site Map
Lineman Grade Tools