For sales and support visit:
hubbellpowersystems.com/contact/

Telescoping Disconnect Tools

Tested per OSHA & ASTM F711

Certified to OSHA dielectric requirements (Sub-part V, section 1926.951) and tested per ASTM F1826-00, Chance Epoxiglas® Telescoping Tools have maximum convenience for the lineman because they permit him to perform many routine jobs from ground level. The universal end fitting on the insulated top section accepts a wide variety of attachments so that the lineman can disconnect switches, replace cutout tubes and reclose, remove pole covers, prune trees and complete many other overhead tasks . . . all with one tool.

The sticks retract to approximately 5 ft. so that they can be carried on most trouble trucks, often in the cab section.

Design Features

Heavy duty, spring-loaded plastic buttons, keep the extended tool sections securely locked in position. As each section is extended and twisted slightly, the buttons pop into place, allowing working to be done with complete control and confidence.

Standard versus Heavy Duty

Both units use the same telescoping tube design. The tip section of the heavy duty units is slightly larger in diameter (1-1/4" versus 1-1/16") so that each telescoping tube is slightly larger, resulting in a more rigid tool when fully extended, important where additional weight may be frequently encountered on maintenance tasks. Both tip sections employ time-proved Chance Epoxiglas, the unicellular foam-core material where the epoxy reinforced fiberglass wall is built around the foam core to prevent any moisture trapping voids that could build up between foam and tool.

Standard Duty (1-1/16"-dia. Tip)
Catalog Number Extended Length (Tool can be locked at each length shown) Storage Retracted Length Base Dia. Number of Sections Weight
C4031023 8 ft. 56" 1-1/4" 2 2 lb./
.9 kg.
C4031017 8 - 12 ft. 57" 1-1/2" 3 2 3/4 lb./
1.2 kg.
C4031018 12 - 16 ft. 59" 1-11/16" 4 4 lb./
1.8 kg.
C4031019 12-1/2 - 16-1/2 - 20 ft. 61" 1-7/8" 5 5-1/4 lb./
2.4 kg.
C4031020 16-1/2 - 20-1/2 - 25 ft. 63" 2-1/16" 6 7 lb./
3.2 kg.
C4031021 17-1/2 - 21-1/2 - 25-1/2 - 30 ft. 65" 2-1/4" 7 8 3/4 lb./
3.9 kg.
C4031022 22 - 26 - 30-1/2 - 35 ft. 67" 2-1/2" 8 11 lb./
5 kg.
T4033349 22 - 28 - 34 - 40 ft. 74-1/2" 2-1/2" 8 12 lb./
5.45 kg.
Compact Standard Duty (1-1/16"-dia. Tip)
Catalog Number Extended Length (Tool can be locked at each length shown) Storage Retracted Length Base Dia. Number of Sections Weight
T4032205 7'-2" 28" 1-7/8" 5 2-3/4 lb./
1.2 kg.
C4031739 14 - 17 - 20 - 23 ft. 48" 2-1/2" 8 9 lb./
4.1 kg.
T4033240 11 ft. 36" 1-11/16" 4 4 lb./
1.8 kg.
Heavy Duty (1-1/4"-dia. Tip)
Catalog Number Extended Length (Tool can be locked at each length shown) Storage Retracted Length Base Dia. Number of Sections Weight
C4031597 8 ft. 56" 1-1/2" 2 3 lb./
1.4 kg.
C4031598 8 - 12 ft. 57" 1-11/16" 3 3 3/4 lb./
1.7 kg.
C4031599 12 - 16 ft. 59" 1-7/8" 4 5 lb./
2.3 kg.
C4031600 12-1/2 - 16-1/2 - 20 ft. 61" 2-1/16" 5 6-1/2 lb./
2.9 kg.
C4031601 16-1/2 - 20-1/2 - 25 ft. 63" 2-1/4" 6 8-1/2 lb./
3.7 kg.
C4031602 17-1/2 - 21-1/2 - 25-1/2 - 30 ft. 65" 2-1/2" 7 10-1/4 lb./
4.6 kg.
Hubbell Power Systems All contents Copyright© 2001 - Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of continuous product improvement, we reserve the right to change design specifications without notice.
Terms of Use | Contact Us | Site Map | Careers
Lineman Grade Tools