hubbellpowersystems.com/contact/
Universal Poles
Interlock with Universal Tools
Designed for use as a hot stick handle for Universal Tools, Chance Universal Poles are made of Epoxiglas® and lightweight aluminum castings.
The Universal Tools shown on the following pages fit under the thumbscrew of the spline on the Universal Pole. For job versatility, the splines allow angling the tool up to 90° depending upon the individual tool design. Universal Adapter M445584 shown on page 2123 may be added between the pole and tool to gain any angle desired.
Storm Tool for Bad Weather
The Storm Tool, a Universal Pole with special rubber insulator skirts, is designed for emergency use. It provides extra leakage distance and disrupts water paths. Skirts break up water streams that would otherwise run down pole.
Universal Fittings for Spliced Poles
Universal fittings are threaded for use on Epoxiglas poles with Rigid Splices. Also see Catalog Section 2500 for Rigid Pole Splices and Epoxiglas Blank Poles.
| Catalog No. | Description | Pole Dia. | Overall Length | Weight |
|---|---|---|---|---|
| PST4032913 | Pole with one universal head | 1-1/4" | 4'2" | 1.9 lb./0.9 kg. |
| H1760 | Pole with one universal head | 1-1/4" | 8' 2" | 3.4 lb./1.5 kg. |
| H17601 | Pole with one universal head | 1-1/4" | 6' 1" | 2.7 lb./1.2 kg. |
| H17602 | Rigid spliced pole with one universal head | 1-1/4" | 4' 1" + 4' | 5.5 lb./2.5 kg. |
| H17603 | Pole with two universal heads | 1-1/4" | 6' 3" | 3.1 lb./1.4 kg. |
| H17604 | Pole with two universal heads | 1-1/4" | 8' 3" | 3.8 lb./1.7 kg. |
| H17606 | Rigid spliced pole with two universal heads | 1-1/4" | 4' 1" + 4' 1" | 5.8 lb./2.6 kg. |
| H176010 | Pole with two universal heads | 1-1/4" | 10' 3" | 4.6 lb./2.1 kg. |
| H176012 | Pole with two universal heads | 1-1/4" | 12' 3" | 5.3 lb./2.4 kg. |
| H176014 | Pole with two universal heads | 1-1/4" | 14' 3" | 6.1 lb./2.8 kg. |
| PST4032914 | Spline universal storm tool with two skirts | 1-1/4" | 4'3" | 2.2 lb./1.0 kg. |
| H1761 | Spline universal storm tool with two skirts | 1-1/4" | 8' 2" | 3.6 lb./1.7 kg. |
| H1770 | Hinged pole with one universal head | 1-1/4" | 8' 2" | 5.4 lb./2.4 kg. |
| H17908 | Pole with two universal head, pole hanger | 1-1/2" | 8' 3" | 5.8 lb./2.6 kg. |
| H179010 | Pole with two universal heads | 1-1/2" | 10' 3" | 6.7 lb./3.0 kg. |
| H179012 | Pole with two universal heads | 1-1/2" | 12' 3" | 7.7 lb./3.5 kg. |
| H179014 | Pole with two universal heads | 1-1/2" | 14' 3" | 8.8 lb./4.0 kg. |
| H4455 | Universal head only | 1-1/4" | - | 0.25 lb./0.11 kg. |
| H4455A | Universal head only | 1-1/2" | - | 0.33 lb./0.15 kg. |
| P4030467P | Replacement Thumbscrew | - | - | - |
Crossarm Tool Hanger
The Chance Crossarm Tool Hanger is adjustable to crossarms ranging in width from 31/4 to 41/2 inches (depth of the crossarm does not matter). The Crossarm Tool Hanger is made of strong, lightweight aluminum alloy and has cadmium-plated steel hardware.
| Catalog No. | Description | Weight |
|---|---|---|
| M1860 | Crossarm Tool Hanger | 2 lb./.9 kg. |
|
All contents Copyright© 2001 -
Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of
continuous product improvement, we reserve the right to change design specifications
without notice.
Terms of Use | Contact Us | Site Map |