For sales and support visit:
hubbellpowersystems.com/contact/

Home › Products › Lineman Grade Tools › Load Handling Equipment › Hoists - Powered › Series 90 Capstan Hoists [1,000-lb. load rating]

Series 90 Capstan Hoists [1,000-lb. load rating]

Electric Drive


12-Volt DC - Power Hoist with 25' #2 Cu Cable, four Terminals, Relay, Foot Switch

Catalog No. Weight, each
C3081172 56 1/2 lb. (25.7 kg.)

115-Volt AC - includes Power Hoist and Foot Control Switch only

Catalog No. Weight, each
C3081170 49 lb. (22.2 kg.)

230-Volt AC - includes Power Hoist and Foot Control

Catalog No. Weight, each
C3081171 49 1/2 lb. (22.5 kg.)

Electrical source requirements


Hydraulic Drive

includes Power Hoist only; To order Foot Control Switch, see next page.

Catalog No. Weight, each
C3081180 28 1/2 lb. (12.9 kg.)

Gasoline Drive

includes Power Hoist and Foot Throttle Control only Recommended bracket: C3080925, see next page.

Catalog No. Weight, each
C3081190 46 lb. (20.9 kg.)
Series 90 Hoist Rope Speed for 1,000 lb. load Source, minimum
12-Volt DC 22 feet per minute 90 amperes motor current
115-Volt AC 40 feet per minute 14 amperes motor current
230-Volt AC 21 feet per minute 7 amperes motor current
Hydraulic 93 feet per minute 8 gal. per min. & 1,000psi
Gasoline 40 feet per minute Engine speed: 7,000rpm
     

Operating speed at full rating

For continuous direct lift or pull at maximum rating (1,000 lb.) with a 20% duty cycle, table at left gives for each powerdrive type:

  1. Rate of lift or pull (Rope Speed)
  2. Power output needed (Source, minimum).

Recommended rope for capstan hoists

Poly-Dacron or Composite Fiber Braided (consists of polyester fibers) as shown in Chance Catalog Section 1250.

Hubbell Power Systems All contents Copyright© 2001 - Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of continuous product improvement, we reserve the right to change design specifications without notice.
Terms of Use | Contact Us | Site Map
Lineman Grade Tools