Complies with OSHA 1910.269 to Test for Absence of Nominal Voltage
• 69kV to 500kV • For Overhead Conductors

Bright display lights indicate voltage class

This smart new-generation instrument makes hot-line voltage testing easier than ever. Its state-of-the-art electronics eliminate the need for a selector switch. Its automatic-ranging function quickly displays the approximate line-to-line voltage class. It provides an easy, reliable means for the operator to determine if a line is:

a) De-energized, or
b) Carrying less than normal system voltage from any source or induced charged from an adjacent live circuit, or
c) Energized at full system voltage.

Simple to operate, the tester attaches to an Epoxiglas® insulating universal handle of appropriate length to maintain proper OSHA working clearances. A single pushbutton activates the instrument, then a single light indicates either Power On (by glowing solid) or Low Battery (by blinking). With a good battery condition, the instrument performs a confirming selftest by illuminating each of the six indicator lights in series while emitting an alternating audible signal.

Then the probe can be brought into contact with the conductor.
It automatically begins detecting at approximately 100V
and holds the display of one of these phase-to-phase voltage
classes: 600V, 4kV, 15kV, 25kV, 35kV, 69kV, 115kV, 161kV,
230kV, 345kV or 500kV. The audible signal begins as a slow
beeping that becomes faster as the reading is increased.

When not in use, the unit's energysaving Sleep mode automatically conserves the battery.

This model is capable of these three test methods: