To save you installation time and money, all Hubbell aluminum capacitor racks are fully assembled. Five sizes are designed for mounting capacitors with a 15-5/8" lug spacing and weighing up to 80 pounds each. The racks are notably light in weight compared to their strength ratings.
Each capacitor rack is furnished complete with a ground wire clamp secured by a 3/8" bolt.
Mounting bolts are not included. The single-unit (CCR1) rack requires a 5/8" through bolt and a lag bolt; the largest rack (CCR912) requires two 3/4" through bolts; and each of other three racks (CCR3, CCR34, CCR6) requires two 5/8" through bolts. All come with illustrated mounting instructions.
Every unit comes with two pre-spaced 3/8" hold-down bolts (each with a flat washer, a lockwasher and a nut) per capacitor, up to the rack's maximum.
These hold-down bolt heads are trapped in the T-slot channel to ensure proper spacing for mounting. Whether mounting the maximum or fewer capacitors, they must be evenly spaced in the rack for proper load distribution.
Wt. per Each
|CCR1||1||One 5/8" Machine Bolt &
One Lag Bolt
|CCR3||3||Two 5/8" Machine Bolts||9" & 12"||17.00 lbs.|
|CCR912||12||Two 3/4" Machine Bolts||10-1/4"||85.00 lbs.|