hubbellpowersystems.com/contact/
Banded Brackets (Steel)
RACK-FRAME TYPE
For mounting 3 KVA to 500 KVA transformers
The rack-frame type bracket may be mounted to the pole with bands and is available in three sizes. Manufactured of high-strength steel, galvanized per ASTM A-153, with bolted construction using a minimum number of parts and completely factory assembled. Transformers can be mounted to these sturdy brackets while on the ground, with the hardware that is included with each bracket, for a convenient, balanced one-lift maneuver to the pole top,-pre-drilled holes accept lifting eyes.
The "T" prefix in the catalog number indicates the unit has a built-in integral lifting eye for an easy one-point lift maneuver.
Banded style has a reinforced bolting surface.
| Catalog Number | Lifting Eye Option Included | kVA Range | NEMA Lug Spacing | Maximum Capacity per Position | Total Maximum Capacity | Additional Transformer Mounting Bolts Only | Approx. Ship Wt. per Each |
|---|---|---|---|---|---|---|---|
| C2120141 | No | 3 to 50 kVA | NEMA A (12") | 2,000 lbs. | 6,000 lbs. | PSC2128028 | 55.00 lbs. |
| T2120222 | Yes | 57.5 lbs. | |||||
| C2120143 | No | 3 to 333 kVA | NEMA A or B (12" or 24") | 3,600 lbs. | 10,800 lbs. | PSC2128029 | 75.00 lbs. |
| T2120224 | Yes | 77.50 lbs. | |||||
| C2120145 | No | 3 to 500 kVA | 5,000 lbs | 15,000 lbs. | 102.00 lbs. | ||
| T2120226 | Yes | 105.00 lbs. |
BANDED CLUSTER MOUNTS
Fits most 3 KVA to 500 KVA transformers
These easy-to-install cluster mounts have a curved back to fit round, tapered poles from 6" (15.2 cm) to 10-1/2" (26.7 cm) in diameter. Manufactured of high-strength steel, galvanized per ASTM A-153. Standard duty mounts have one set of four 6" long clamping bolts. Heavy-duty mounts have two sets of bolts (see sketch).
Lag screws can be used to position the mounting bracket before tightening clamping bolts. Support rating, however, does not depend on the use of lag screws. All banding hardware for mounting to the pole, hardware to attach transformer to mounting bracket, ground clamp and installation instructions are included.
The Banded Cluster Mounts may be ordered in packages (recommended), or by components (not recommended). Brackets provide 6-3/8" of pole clearance.
| Catalog Number | kVA Range | NEMA Lug Spacing | Mounting Distance From Pole | Description | Approx. Ship Wt. per Each |
|---|---|---|---|---|---|
| 315 | 3 to 50 kVA Single Phase, 15 to 30 kVA Three Phase | NEMA A (12") | 6" | Consist of one 5350 and three C2110009 | 50.00 lbs. |
| HD315 | Consist of one HD5350 and three C2110009 | 65.00 lbs. | |||
| 350 | 75 to 167 kVA Single Phase, 45 to 75 kVA Three Phase | NEMA B (24") | Consist of two 5350 | 72.00 lbs. | |
| HD350 | Consist of two HD350 | 86.00 lb. | |||
| 3100 | 250 kVA to 500 kVA Single Phase, 112 kVA to 300 kVA Three Phase | NEMA C (24" or 36") | Consist of two 5350 six C2110012 | 129.60 lbs. | |
| HD3100 | Consist of two HD5350 six C2110012 | 137.60 lbs. |
|
All contents Copyright© 2001 -
Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of
continuous product improvement, we reserve the right to change design specifications
without notice.
Terms of Use | Contact Us | Site Map |