Nylon Threads

• Eliminate handling and disposal concerns associated with Lead threads.
• Nylon threads by Hubbell Power Systems meet all ANSI performance and dimensional requirements.
• Insulator fit is firm, yet resilient.
• Nylon threads are more impact resistant than on pins with Lead threads.

Clamp-Type Steel Pins

For Wood or Composite Crossarms

1" and 1-3/8" ANSI Standard Nylon Threads Galvanized per ASTM A-153

Clamp type crossarm pins (saddle pins) can be used for straight line, angle or corner construction. The clamping design does not require cutting or drilling of the crossarm. The back plate has raised projections to prevent slippage. Each pin is shipped with hardware assembled as shown.

Catalog Number - Nylon Threads	Catalog Number - Lead Threads	Insulator Thread - A	Shaft Height - B	Accommodates Crossarm Sizes	Carriage Bolts	Approx. Ship Wt. per Each - Nylon/Lead
14322P*	14322	1" ANSI	5-3/4"	3-3/4" x 4-3/4"	5/8" x 7	5.40 lbs./5.60 lbs.
143221P*	143221	1-3/8" ANSI	7"			6.16 lbs./6.46 lbs.

• * RUS Listed, f - Pin, crossarm