For sales and support visit:
hubbellpowersystems.com/contact/
hubbellpowersystems.com/contact/
Shank Type Crossarm
Nylon Threads
- Eliminate handling and disposal concerns associated with Lead threads.
- Nylon threads by Hubbell Power Systems meet all ANSI performance and dimensional requirements.
- Insulator fit is firm, yet resilient.
- Nylon threads are more impact resistant than on pins with Lead threads.
Low Voltage Forged Steel Pins
Long Shank for Wood or Composite Crossarms
Short Shank for Steel Crossarms
1" ANSI Standard Nylon Threads Galvanized per ASTM A-153
The forged design of low voltage insulator pins includes flats for wrench engagement and a wide base to distribute load stresses. Each pin is shipped with hardware assembled as shown.
High Voltage Forged Steel Pins
Long Shank for Wood or Composite Crossarms
1" ANSI Standard Nylon Threads Galvanized per ASTM A-153
The forged design of low voltage insulator pins includes flats for wrench engagement and a wide base to distribute load stresses. Each pin is shipped with hardware assembled as shown.
| Catalog Number - Nylon Threads |
Catalog Number - Lead Threads |
Insulator Thread |
Shank (Portion through Crossarm) |
Shaft (Portion above Crossarm) |
Washer | ANSI/RUS Cantilever Load Rating |
Approx. Ship Wt. per Each |
|||
|---|---|---|---|---|---|---|---|---|---|---|
| Shank Dia. - A |
Shank Length - B |
Min. Thread Length of Shank - D |
Shaft Height - C |
Base Dia. - F |
||||||
| 886P*# | 886*# | 1" ANSI | 5/8" | 1-1/2" | 1-1/4" | 5" | 2" | Coil Lock Washer | 1,000 lbs. | .94 lbs. |
| 887P# | 887# | 6" | 800 lbs. | 1.25 lbs. | ||||||
| 881P*# | 881*# | 5-3/4" | 3" | 5" | 2" | 2" Sq. x 1/8" | 1,000 lbs. | 1.48/lbs. | ||
| 884P# | 884# | 6" | 800 lbs. | 1.61 lbs. | ||||||
| C2060266 | 7 7/8" | 3" | 3.19 lbs. | |||||||
| 881AP# | 881A# | 6-1/2" | 5" | 2" | 1,000 lbs. | 1.56 lbs. | ||||
| 883P# | 883# | 6" | 800 lbs. | 1.64 lbs. | ||||||
| T2060610P | 7-1/2" | 4" | 7-1/2" | 1.71 lbs. | ||||||
| C2060294 | 7-7/8" | 3" | 3.40 lbs. | |||||||
| PS893P | PS893 | 3/4" | 1-3/4" | 1-1/2" | 6" | 2-1/2" | Coil Lock Washer | 1,400 lbs. | 1.84 lbs. | |
| T2060410 | 7" | 2.00 lbs. | ||||||||
| PS890P | PS890 | 6-1/2" | 3-1/4" | 6" | 2-1/4" Sq. x 3/16" | 1,400 lbs. | 2.64 lbs. | |||
| 4705P | 4705 | 2-1/2" | 5" | 2-5/8" | 2,500 lbs. | 2.68 lbs. | ||||
| 4706P | 4706 | 6" | 2,500 lbs. | 2.76 lbs | ||||||
| 4717P* | 4717* | 1-3/8" ANSI | 5/8" | 7" | 4" | 7" | 3" | 2,200 lbs. | 3.83 lbs. | |
| T2060409 | 3/4" | 1-3/4" | 1-1/2" | 2-1/2" | Coil Lock Washer | 2.50 lbs | ||||
| DP5T23 | 8" | 3" | 3.45 lbs. | |||||||
| 4326P# | 4326 | 7" | 3" | 7" | 3" Sq. x 3/16" | 2,200 lbs. | 4.50 lbs. | |||
| 4328P# | 4328# | 8" | 1,900 lbs. | 4.60 lbs. | ||||||
| 4332P# | 4332# | 10" | 3-1/2" | 2,100 lbs. | 5.58 lbs. | |||||
|
All contents Copyright© 2001 -
Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of
continuous product improvement, we reserve the right to change design specifications
without notice.
Terms of Use | Contact Us | Site Map |