For sales and support visit:
hubbellpowersystems.com/contact/

Home › Products › Pole Line Hardware › Service, Secondary & Neutral Hardware › Bolts, Upset Spool

Bolts, Upset Spool

Used in rural secondary construction. Has 5/8" thread diameter.

Includes square nut, round washer, and cotter key on short end and Square nut and M-F locknut on long end. Used with spool insulators ANSI 53-2. Hot dip galvanized.

5/8" Thread Diameter (5/8-11UNC) 1,900 lbs Minimum load at 10° deflection Single Upset
Catalog Number Shank Length Overall Length Thread Length Approx. Ship Wt. per Each
7741# 8" 12 3/4" 4" 1.4 lbs.
774112# 9" 13 3/4" 1.5 lbs.
7742# 10" 14 3/4" 1.6 lbs.
7743# 12" 16 3/4" 6" 1.7 lbs.
7744 14" 18 3/4" 1.8 lbs.
PS7745 16" 20 3/4" 1.9 lbs.
PS7746 18" 22 3/4" 2.0 lbs.
PS7747 20" 24 3/4" 2.1 lbs.
  • Click on Catalog Number to view sales drawing
  • # ANSI Standard, C135.31
5/8" Thread Diameter (5/8-11UNC) 800 lbs Minimum load at 10° deflection Double Upset
Catalog Number Shank Length Overall Length Thread Length Approx. Ship Wt. per Each
7826# 8" 13 3/4" 6" 1.66 lbs.
7828# 9" 14 3/4" 1.62. lbs.
7830# 10" 15 3/4" 1.68 lbs.
7832# 12" 17 3/4" 1.86 lbs.
7834 14" 19 3/4" 2.04 lbs.
  • Click on Catalog Number to view sales drawing
  • # ANSI Standard, C135.31

 

 

Hubbell Power Systems All contents Copyright© 2001 - Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of continuous product improvement, we reserve the right to change design specifications without notice.
Terms of Use | Contact Us | Site Map
Pole Line Hardware