
Home › Products › Pole Line Hardware › Messenger & Telecommunications Hardware › Clamps, Messenger Suspension
Clamps are used with through bolts to support cable at poles. Through bolt also serves as clamping member. One or more nuts and/or washers are used between the pole and clamp for required spacing. No. 7901 is used on very light cables. This one bolt clamp consists of the two clamping members only. Nos. 7902L and 7902R are used at corners and angles. Nos. 7903 and 7904 are used on straight runs.
| Catalog Number |
Type | Mounting Bolt Hole Dia. |
Messenger Cable Dia. |
Clamp Length |
Clamp Bolt Dia. |
Approx. Ship Wt. per Each |
|---|---|---|---|---|---|---|
| 7902L | Two-Bolt | 11/16" | 1/4" to 7/16" | 7" | 1/2" x 1-5/8" |
2.04 lbs. |
| 7902R | Two-Bolt | 13/16" | 1/4" to 7/16" | 7' | 1/2" x 1-5/8" |
2.04 lbs. |
| Catalog Number |
Type | Mounting Bolt Hole Dia. |
Messenger Cable Dia. |
Clamp Length |
Clamp Bolt Dia. |
Approx. Ship Wt. per Each |
|---|---|---|---|---|---|---|
| 7901 | One-Bolt | 11/16" | 1/4" to 7/16" | 2-1/2" | None | 0.75 lbs. |
| 7903 | Two-Bolt | 11/16" x 15/16" | 1/4" to 7/16" | 5 3/4" | 1/2" x 1-5/8" | 1.78 lbs. |
| 7903L | Two-Bolt, Flat Keeper Plate | 11/16" x 15/16" | 1/4" to 7/16" | 5 3/4" | 1/2" x 1-5/8" | 1.77 lbs. |
| 7904 | Two-Bolt | 13/16" | 1/4" to 7/16" | 5 3/4" | 1/2" x 1-5/8" | 1.75 lbs. |
Used as additional support in attaching cable suspension clamps to pole for heavy loads.
| Catalog Number |
Steel Size | Mounting Hole Dia. |
Hole to Hole Distance |
Approx. Ship Wt. per Each |
|---|---|---|---|---|
| 7905 | 1/8" x 1-1/2" | 11/16" | 5-29/32" | 0.41 lbs. |
|
|
All contents Copyright© 2001 -
Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of
continuous product improvement, we reserve the right to change design specifications
without notice.
Terms of Use | Contact Us | Site Map |
