|
1-Ton C309-323 |
2-Ton C312-0000 |
Designed with special features, both 1-Ton and 2-Ton hoists offer a choice of two handle options for utility maintenance and construction. For rubber-glove work, select hoist with plastisol cap on handle end. For operation by hot-line tools, specify hoist with swivel-eye on handle end. All models have hot-stick rings on hooks and latches.
Single strap of 1-Ton units reaches and lifts farther. 2-Ton units employ a sheave-mounted hook in a double-strap becket.
|
Specifications
1,000-lb. single-strap strength rating
| Minimum |
27 in. |
27 in. |
| Maximum |
8 ft. |
6 ft. |
| Distance |
5 ft. 9 in. |
3 ft. 9 in. |
|
Hot-Stick Handle Option
 Safety tips from label on hoist handles:
- Insure hook-to-hook pull in in a straight line and does not exceed the load rating stamped on the handle
- Do not permit handle to self-ratchet
- Do not hand, bounce, or exceed 200 pounds force on handle
- Do not replace handle with a longer handle or use an extension on handle
- Do not use hoist as a load binder
- Close latches on safety hooks before using
|
*1-Ton Nylon-Strap Hoists and Accessories
| C309-0323 |
Hoist with Regular Handle |
123/4 lb. / 5.7 kg. |
| C309-0467 |
Hoist with Hot-Stick Handle |
133/4 lb. / 6.2 kg. |
| C306-0000 |
Storage Bag for either 1-Ton Hoist above |
1/8 lb. / 0.05 kg. |
| E309-0059 |
Replacement Strap with Hot-Stick Hook |
1 lb. / 0.45 kg. |
| E309-0027 |
Regular Handle 22" x 11/2" Epoxiglas |
7/8 lb. / 0.4 kg. |
| E309-0470 |
Swivel-end Handle 30" x 11/2" Epoxiglas |
13/4 lb. / 1.8 kg. |
*2-Ton Nylon-Strap Hoists and Accessories
| C312-0000 |
Hoist with Regular Handle |
141/2 lb. / 6.5 kg. |
| C309-0468 |
Hoist with Hot-Stick Handle |
151/2 lb. / 7 kg. |
| E309-0262 |
Replacement Strap (no hook) |
1/2 lb. / 0.2 kg. |
| E309-0264 |
Regular Handle 36" x 11/2" |
11/2 lb. / 1.65 kg. |
E309-0472
|
Swivel-end Handle 36" x 11/2" Epoxiglas
|
13/4 lb. / 1.8 kg.
|
|
| *These hoist are not insulated live-line tools. If working on energized electrical lines, these hoists must be used with appropriate length insulating link sticks (see ordering information above and below). |
Epoxiglas® Hoist Link Sticks
To permit hot-line work with a nylon-strap ratchet hoist, a properly applied link stick insulates the hoist form a energized conductor. The hoist link stick is a 11/4"-diameter Epoxiglas pole with a steel safety hook on one end and a butt swivel on the other.
 |
To apply the link stick, attach the safety hook of the stick to a wire grip using the hotstick eye to operate the hook. Complete the application by connecting the nylon-strap hoist to the link stick butt swivel and to a pole or crossarm.
Rated working load: 4,000 lb.
| C400-1175 |
12" Epoxiglas |
4 lb. / 1.8 kg. |
| C400-2399 |
18" Epoxiglas |
5 lb. / 2.25 kg. |
| C400-2400 |
24" Epoxiglas |
6 lb. / 2.7 kg. |
|
|
