|
1,000-lb. and 3,000-lb. load ratings --- 12V, 115V, 230V, Hydraulic, Gasoline
|
Versatile to various applications
Lightweight yet powerful, these portable hoists move many heavyweight tasks and can get into remote or difficult-access sites. Examples: Setting utility poles, pulling wheeled equipment over obstacles, raising transformers (even over fences in back lots), hoisting heavy insulators, stringing and tensioning conductors, pulling cable (indoors and underground).
Simple technique eases all loads
Graph at right and diagram below show capstan principle in action. Operator effort remains low for typical loads simply by adding wraps on the capstan drum. So little effort is required, any crew member can run the hoist. Control is so accurate, loads can be moved fractions of an inch. |
Example:
4 wraps of rope = 1:44 ratio.
That is, 1 lb. pull on Fall Line develops 44 lb. on Load Line. Therefore, 20 lb. of pull develops 880 lb. of lift. |
Note: Always use at least as many wraps of rope on the drum to lower a load required to lift that load. |
| For Ordering Information on both ratings of hoists, components and options, refer to the next three pages. |
[sections 1152 - 1153 - 1154 -1155 - 1156] | [Home]
|
