EASY, 'RIGHT-ON' APPLICATION

Instead of you manipulating a hinged or clamp-type inductive pickup, the patented LoadLooker electronically closes the loop for you. Its unique U-shape jaw senses the amperage present between its tines. The open- end design lets you check loads on components not accessible by other hot-line ammeters.

SIMPLE PUSHBUTTON OPERATION

A single button controls the operation. Push it once to turn on the LoadLooker. Push it again and the LoadLooker will hold the next reading it "sees." The unit even turns itself off after several idle minutes!

DIRECT-READING ACCURACY

The "hold" feature lets you bring the meter down from the line to eye level. Its digital display gives you a direct readout of the amperage on the line. There's no chart to use for conversion, on tables or computations to make. LoadLooker digital technology does that for you. You just read the results!

SAVES TIME, PROBLEMS, REVENUE

By its simplicity, the LoadLooker can help integrate beneficial practices to you operating?maintenance procedures. Among them:

• Balance loads... the first time! Instead of adding load at random, LoadLooker lets you check each phase of a circuit to select the on you want. Of course, you can use it to identify load imbalances, too.
• Raise the level of worker safety. A lineworker can quickly "size" a hot-line jumper to the job. LoadLooker's convenience makes it easy to "see" the load beforehand to avoid placing and under-rated jumper.
• Reduce billing errors. By verifying the ratio of current transformers on heavily-loaded industrial consumers, LoadLooker could help save thousands of dollars in lost revenues ... every month.

SEVEN MODELS FOR SPECIFIC NEEDS

To see the results in the form you want, choose from seven LoadLooker models. They offer you these choices:

• Amperage Displayed - True RMS or Averaging
• Jaw Capacity - Narrow 1.89" or Wide 3.86"
• Voltage Range - Up to 69kV or Up to 400kV

Any way you look at it, there's a Chance LoadLooker ammeter to suit your needs. On overhead distribution systems, substations and transmission lines, your crews need to see the loads they work using the "open-loop" speed of LoadLooker.

return