Light weight and pre-assembled for installation ease
To save you installation time and money, all Hubbell aluminum capacitor racks are fully assembled. Five sizes are designed for mounting capacitors with a 155/8" lug spacing and weighing up to 70 pounds each. The racks are notably light in weight compared to their strength ratings.
Each capacitor rack is furnished complete with a ground wire clamp secured by a 3/8" bolt.
Mounting bolts are not included. The single-unit (CCR-1) rack requires a 5/8" through bolt and a lag bolt; the largest rack (CCR-9/12) requires two 3/4" through bolts; and each of other three racks (CCR-3, CCR-3/4, CCR-6) requires two 5/8" through bolts. All come with illustrated mounting instructions.
Adjustability of multi-unit models
Every unit comes with two pre-spaced 3/8" hold-down bolts (each with a flat washer, a lockwasher and a nut) per capacitor, up to the rack's maximum.
These hold-down bolt heads are trapped in the T-slot channel to ensure proper spacing for mounting. Whether mounting the maximum or fewer capacitors, they must be evenly spaced in the rack for proper load distribution.
Ordering Information |
Catalog
Number |
Ratings |
Mounting Distance from Pole |
Weight |
CCR-1 |
1 Capacitor |
6" |
41/2 lb./9.9 kg. |
CCR-3 |
Max. 3 Capacitors |
31/4" |
17 lb./37.5 kg. |
CCR-3/4 |
Max. 4 Capacitors |
31/4" |
18 lb./39.7 kg. |
CCR-6 |
Max. 6 Capacitors |
31/4" |
221/2 lb./49.6 kg. |
CCR-9/12 |
Max. 12 Capacitors |
91/2" |
85 lb./187.4 kg. |
