For sales and support visit:
hubbellpowersystems.com/contact/

Home › Products › Truck Accessories › Conductor Lift Arms › Three-Phase Boom Lifts

Three-Phase Boom Lifts

  • Jib-mounted
  • Winch-driven
  • Constant-load monitor
  • 1,200-lb. rating*

Hot-line tool set enables a material-handler boom truck to lift single- or three-phase system conductors. Operator remains in the bucket, positioned to perform such routine jobs as replacing insulators, crossarm or pole

Available in eight sleeve sizes to fit on boom truck jibs listed on page 4153, each complete unit includes:

  • 10' Vertical orange Epoxiglas® mast (4" x 4")
  • 10' Horizontal gray Epoxirod® support arm (2-1/2" dia.) with four Heavy-Duty Roller-type Wireholders for conventional crossarm construction
  • 6' Horizontal gray Epoxirod support arm (2-1/2" dia.) with one additional Wireholder for center mast for armless construction
  • Storage bags for all components above.
For Ordering Information Click Here

Ordering Information

Catalog No. Truck Application
C4001612 Asplundh: 3-3/4"-dia. jib
C4001613 Telelect: 4-1/4"-dia. jib
C4001664 ALTEC®: 4"-dia. jib
C4001677 Hi-Ranger model 5H*: 2-7/8"-dia. jib
C4001709 Teco or Holan: 4" x 4"-sq. jib
C4001710 Pitman: 4" x 5"-sq. jib
C4001711 R.O. Products: 5-1/4"-dia. jib
C4002719 No Jib Sleeves included. See below for correct size.
*For Hi-Ranger model 6H with top-mounted winch,
order E4002215 Jib Sleeve, listed below.

Complete Units

Each complete unit includes a jib sleeve in size listed in addition to:

10' Vertical orange Epoxiglas® mast (4" x 4") and 10' Horizontal gray Epoxirod® support arm (2-1/2" dia.) with four Heavy-Duty Roller-type Wireholders for conventional crossarm construction and 6' Horizontal gray Epoxirod support arm (2-1/2" dia.) with one additional Wireholder for center mast for armless construction and Storage bags for all components above.

Jib Sleeves ONLY

Catalog No. Jib Application Weight
E4001651 3-3/4"-dia., as Asplundh 15 lb. / 6.75 kg.
E4001652 4-1/4"-dia., as Telelect 15 lb. / 6.75 kg.
E4001678 4"-dia., as ALTEC® 20 lb. / 9.09 kg.
E4001679 2-7/8"-dia., as Hi-Ranger model 5H 15 lb. / 6.75 kg.
E4001689 4" x 4"-sq., as Teco or Holan 20 lb. / 9.09 kg.
E4001714 4" x 5"-sq. as Pitman 20 lb. / 9.09 kg.
E4001715 5-1/4"-dia., as R.O. Products 20 lb. / 9.09 kg.
E4001953 4" x 4" Reach All 20 lb. / 9.09 kg.
E4002215 4" x 4"-sq., as Hi-Ranger model 6H with top-mounted winch 22 lb. / 10.8 kg.
E4002262 4-3/4"-dia., as Telelect on overcenter model trucks 15 lb. / 6.75 kg.
E4002293 3-1/2"-sq., as Lift-All 22 lb. / 10.8 kg.
T4002647 4" x 4" ALTEC® 44 lb. / 21.6 kg.
PST4003111 4" x 4" ALTEC® Adapter fits AM55 20 lb. / 9.09 kg

For other sizes, consult factory.
Slotted opening in longest two models at left accepts rope sheave for operation by winch mounted on top of boom tip. Sleeve E4001678 works on ALTEC® rigs with winch mounted on top or bottom of boom tip.

Hubbell Power Systems All contents Copyright© 2001 - Hubbell Incorporated. All rights reserved. Because Hubbell has a policy of continuous product improvement, we reserve the right to change design specifications without notice.
Terms of Use | Contact Us | Site Map
Truck Accessories